8.1.2 The
                                 manual required by Vol  2, Pt  4, Ch  2,  8.1 General 8.1.1 is
                                 to be placed on board and is to contain the following information:
                                 
                              
                              
                              
                              
                                 - 
                                    
                                    
                                    
Description of
                                       the water jet propulsion system with details of function and design
                                       operating limits. This is also to include details of support systems
                                       such as lubrication, cooling and condition monitoring arrangements.
                                    
                                    
                                    
                                  
                                 - 
                                    
                                    
                                    
Identification
                                       of all components together with details of any that have a defined
                                       maximum operating life.
                                    
                                    
                                    
                                  
                                 - 
                                    
                                    
                                    
Instructions for
                                       installation of the system on board ship, with details of any required
                                       specialised equipment.
                                    
                                    
                                    
                                  
                                 - 
                                    
                                    
                                    
Instructions for
                                       commissioning at initial installation and following maintenance.
                                    
                                    
                                    
                                  
                                 - 
                                    
                                    
                                    
Maintenance and
                                       service instructions to include inspection/ renewal of bearings and
                                       sealing arrangements. This is also to include component fitting procedures,
                                       clearance measurements and lubricating oil treatment, where applicable.
                                    
                                    
                                    
                                  
                                 - 
                                    
                                    
                                    
Actions required
                                       in the event of fault/failure conditions being detected.
                                    
                                    
                                    
                                  
                                 - 
                                    
                                    
                                    
Precautions to
                                       be taken by personnel working during installation and maintenance.