2.1.1 At least
three copies of the following plans and information are to be submitted.
2.1.2 Venting,
sounding and drainage arrangements for all watertight compartments.
2.1.3 The following
diagrammatic plans including details of the material and pipe dimensions/thickness:
- Bilge and ballast systems including the capacities of the pumps
on bilge service.
- Fuel oil systems.
- Tank overflow arrangements
- Lubricating oil systems.
- Flammable liquids used for control and heating systems.
- Power transmission systems for services essential for safety or
for the operation of the craft at sea.
- Cooling water systems for main and auxiliary services.
- Compressed air system for main and auxiliary services.
- Steam systems with a design pressure above 7 bar.
2.1.4 Arrangement
of fuel oil storage tanks with a capacity of over 0,5 m3 where
these do not form part of the structure of the craft.
2.1.5 Where
it is intended to use plastic pipes for Class I, Class II and any
Class III systems for which there are requirements in these Rules,
details of the following:
-
Properties of the
materials.
-
Operating conditions.
-
Intended service
and location.
-
Pipes, fittings
and joints.
2.1.6 Design
details of the following components:
-
Flexible hoses.
-
Sounding devices.
-
Resiliently seated
valves.
-
Expansion joints.
-
Components of an
unusual or novel nature.
2.1.7 For craft
having two or more main engines and multi-hull craft:
- The number of main engines required by the craft to navigate safely.