Section 10 Erections

Clasification Society 2024 - Version 9.40

Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Inland Waterways Ships, July 2022 - Part 4 Ship Structures (Ship Types) - Chapter 9 Passenger Ships - Section 10 Erections

Section 10 Erections

10.1 General

10.1.1 Erections are to be constructed, in general, according to the requirements of Pt 3, Ch 8 Superstructures, Deck-houses and Bulwarks.

10.1.2 Where an erection is fitted complying with Pt 4, Ch 9, 3.1 General 3.1.6 the thickness of the deck plating is to comply with the requirements of Table 9.10.1 Deck plating of effective superstructures and deckhouses, but on ships having a length of 65 m and over the thickness may require to be increased to meet the requirements of Pt 4, Ch 9, 3 Longitudinal strength.

Table 9.10.1 Deck plating of effective superstructures and deckhouses

Item and parameter	Required
Deck plating Thickness
Symbols
L, t and s as defined in Pt 4, Ch 9, 1.14 Symbols and definitions 1.14.1

10.1.3 The side plating of effective erections is to be well stiffened at ends and efficient scarfing into the main structure is to be arranged.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.