Section 3 Buckling
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules for the Classification of Trimarans, July 2022 - Volume 1 Regulations and Structural Arrangements - Part 6 Scantling Determination - Chapter 2 Design Tools - Section 3 Buckling

Section 3 Buckling

Parent topic: Chapter 2 Design Tools

3.1 General

3.1.1 In general, all areas of the structure are to meet the buckling requirements for the design stresses calculated according to Vol 1, Pt 5, Ch 3 Motion Response.

3.2 Buckling requirements

3.2.1 Requirements for buckling are to be calculated according to the following Sections of the Complementary Rules:

  1. Vol 1, Pt 6, Ch 2, 4 Vibration control of the Rules for Naval Ships

  2. Vol 1, Pt 6, Ch 5, 3 Scantling determination for NS2 and NS3 ships of the Rules for Naval Ships

  3. Pt 6, Ch 7, 4 Buckling control of the Rules for Special Service Craft

  4. Pt 3, Ch 4, 7 Hull buckling strength of the Rules for Ships

  5. Additional requirements for specific ship types are also to be complied with.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.