M

← Back to index · 206 terms

Share:WhatsAppLinkedInFacebookXTelegramEmail

M/V

Source: Chartering & Shipping Terms Glossary
Motor Vessel / Merchant Vessel

Machinery spaces

Source page ref: 362
The spaces containing the propulsion machinery, boilers, generators, and major auxiliaries; as high fire-risk areas they are subject to extensive fire-protection, escape, and safety requirements under SOLAS. IMO-grounded

Mafi Trailer

Source: Chartering & Shipping Terms Glossary
German brand name of a roll trailer used for RoRo purposes

Magna flux

Source page ref: 362
A proprietary name for magnetic-particle inspection, a method of detecting surface and near-surface cracks in steel.

Magnetic compass

Source page ref: 126
A compass that indicates direction by aligning with the earth's magnetic field; required to be carried as an independent heading reference under SOLAS, with corrections for the ship's own magnetism. IMO-grounded

Magnetic particle test

Source page ref: 362
A non-destructive test for surface and near-surface cracks in ferromagnetic materials, in which magnetic particles gather at flaws revealed by a magnetic field.

Maiden Trip

Source: Chartering & Shipping Terms Glossary
First voyage of a vessel or aircraft after delivery from new-building to her owner(s).

Maiden voyage

Source page ref: 362
A ship's first voyage in service after delivery.

Main engine lubricating oil system

Source page ref: 362
The system that stores, cools, filters, and circulates lubricating oil to the main engine's bearings, pistons, and other parts.

Main generating station

Source page ref: 362
The space and equipment providing the ship's main electrical power, supplying the switchboard from which the ship's services are fed.

MAIN LINE OPERATOR (MLO)

Source: Chartering & Shipping Terms Glossary
A carrier employing vessel(s) in the main or principal routes in a trade but not participating within a consortium.

Main propulsion power

Source page ref: 362
The power delivered by the main engines to drive the ship, the basis of its design speed.

Main source of electrical power

Source page ref: 362
The generating plant that normally supplies the ship's electrical needs, backed up by an independent emergency source as required by SOLAS. IMO-grounded

Main vertical zones

Source page ref: 363
The divisions, not normally exceeding a set length, into which a passenger ship's hull and superstructure are subdivided by fire-resisting bulkheads to contain fire, as required by SOLAS chapter II-2. IMO-grounded

Maintainability

Source page ref: 363
The ease with which equipment can be maintained and repaired, an important design consideration affecting availability and cost.

Maintenance

Source page ref: 363
The work of keeping a ship and its equipment in proper condition, whether by routine servicing, planned overhaul, or repair.

Maintenance Chain

Source: Chartering & Shipping Terms Glossary
A sequence of events in a goods flow which preserves and/or restores the value of a specific good. This may include: Repair.

Maintenance costs

Source page ref: 363
The expenditure on keeping a ship and its systems in working order, a significant part of operating costs.

Maintenance of class

Source page ref: 363
The continued compliance of a ship with classification rules, demonstrated through the programme of periodic surveys, on which the validity of its class depends. IMO-grounded

Maintenance tools

Source page ref: 363
The tools and equipment carried aboard for the upkeep and repair of the ship's machinery and structure.

Maintenance work

Source page ref: 363
The tasks carried out to maintain the ship, ranging from routine servicing to repair, planned to minimise disruption to operation.

Major failure of tanker

Source page ref: 363
A serious failure category used in assessing tanker safety and risk, involving significant loss of containment or structural integrity.

Man-overboard manoeuvre (Williamson turn)

Source page ref: 366
A standard ship-handling manoeuvre to return a vessel to a person who has fallen overboard, the Williamson turn bringing the ship back along its original track.

Management of Change (MOC)

Source: ISGOTT 6th Edition (MaritimeDatabase #103)
A formal process for reviewing and controlling changes to equipment, procedures, or organisation, so that any new hazards are identified and managed before the change is put into effect.

Mandel shackle

Source page ref: 363
A type of shackle used in mooring or rigging connections.

Manhole

Source page ref: 363
A small access opening, with a removable cover, allowing entry into a tank or enclosed space for inspection and maintenance.

Manifold

Source page ref: 363
A junction of pipes through which flows are distributed or collected, such as a tanker's cargo manifold.

Manifold (cargo)

Added — maritime supplement
The athwartships arrangement of pipe connections at the midship area of a tanker where cargo hoses or shore arms are connected for loading and discharging. The manifold spacing and fittings are standardised so that ship and terminal connections match.

Manipulator

Source page ref: 363
A remotely controlled arm, for example on a remotely operated vehicle, used to handle tools and objects underwater.

Manned facility

Source page ref: 363
An offshore installation or unit that is permanently or regularly staffed, as opposed to a normally unattended one.

Manning

Source page ref: 363
The provision of crew to operate a ship; ships must carry a safe minimum manning appropriate to their type and operation, documented under SOLAS. IMO-grounded

Manoeuvrability of the ship, manoeuvring capability of ship

Source page ref: 363
A ship's ability to change and hold its course and speed in response to its rudder and engine, assessed against the IMO standards for manoeuvrability. IMO-grounded

Manoeuvring booklet

Source page ref: 365
A booklet aboard giving detailed information on the ship's manoeuvring characteristics, recommended by IMO to assist the master in ship handling. IMO-grounded

Manoeuvring characteristics

Source page ref: 364
The measurable qualities describing how a ship responds in manoeuvres, such as turning circle, stopping distance, and course-keeping, evaluated under the IMO manoeuvring standards. IMO-grounded

Manoeuvring criteria

Source page ref: 364
The standards set by the IMO defining acceptable manoeuvring performance for ships, covering turning, initial turning, yaw-checking, and stopping ability. IMO-grounded

Manoeuvring Information

Source page ref: 365
Information on a ship's handling characteristics, presented in a pilot card, wheelhouse poster, and manoeuvring booklet as recommended by the IMO. IMO-grounded

Manoeuvring speed

Source page ref: 365
A reduced, controllable speed suitable for close-quarters manoeuvring and for prompt engine response.

Manoeuvring stations

Source page ref: 368
The positions, such as the bridge, engine controls, and mooring stations, that are manned during manoeuvring into and out of port.

Manoeuvring tests

Source page ref: 365
The standard trials, such as turning circles and zig-zag tests, carried out to measure a ship's manoeuvring characteristics against the IMO criteria. IMO-grounded

Manual tension mooring winch

Source page ref: 395
A mooring winch whose tension is adjusted by hand by the crew, as opposed to an automatic self-tensioning winch.

MANUFACTURERS (AIM)

Source: Chartering & Shipping Terms Glossary
interested in automatic identification.

Manufacturers Plate

Source: Chartering & Shipping Terms Glossary
A plate indicating the name and address of the container manufacturer and particulars of the container.

Manufacturing Process

Source: Chartering & Shipping Terms Glossary
The producing of goods or wares by manual labour or machinery, often on a large scale and with division of labour.

Manufacturing Resource Planning

Source: Chartering & Shipping Terms Glossary
A method for the effective planning of a manufacturing company, being

Margin line

Source page ref: 368
A line at least 76 millimetres below the upper surface of the bulkhead deck at the side, used in subdivision and damage-stability assessment as a limit the waterline must not reach after flooding. IMO-grounded

Margin plate

Source page ref: 368
The plate forming the outboard edge of the inner bottom, connecting it to the bilge, bounding the double-bottom tanks.

MARIN

Source page ref: 368
The Maritime Research Institute Netherlands, a leading hydrodynamic research and model-testing organisation.

MARIN ARK

Source page ref: 368
A proprietary marine evacuation system using a chute and inflatable platform to evacuate people from a ship into liferafts.

Marine Equipment Directive (MED)

Added — maritime supplement
The European Union framework under which specified shipboard safety equipment is type-approved and marked with the wheelmark, confirming it meets international performance and testing standards. Notified bodies, including classification societies, carry out the conformity assessment.

Marine evacuation systems (MES)

Source page ref: 370
Systems, such as chutes or slides leading to inflatable platforms and liferafts, that allow rapid evacuation of large numbers of people from a ship; required and regulated under SOLAS and the LSA Code. IMO-grounded

Marine fuel oils

Source page ref: 370
The oils supplied for burning in ships' engines and boilers, ranging from heavy residual fuels to distillates, with quality and sulphur content regulated under MARPOL Annex VI. IMO-grounded

Marine Insurance Policy

Source: Chartering & Shipping Terms Glossary
An insurance policy protecting the insured against loss or damage to his goods occurred during ocean transport.

Marine Loading Arm (MLA)

Source: ISGOTT 6th Edition (MaritimeDatabase #103)
A mechanical articulated-pipe arm at a terminal used to connect to a tanker's manifold for loading or discharging liquid cargo, replacing flexible hoses at many berths.

Marine riser

Source page ref: 370
The large-diameter pipe connecting a floating drilling or production unit to equipment on the seabed, through which fluids and tools pass.

Maritime industrial Organizations

Source page ref: 370
Organisations serving the maritime industry, such as trade associations, classification societies, and research institutes.

Maritime inquiry

Source page ref: 372
An official investigation into a marine casualty or incident to establish its causes and improve safety, conducted under the principles of the Casualty Investigation Code. IMO-grounded

Maritime Safety Committee (MSC)

Source page ref: 370
The senior technical committee of the IMO, responsible for measures concerning the safety and security of shipping, which adopts and amends conventions such as SOLAS. IMO-grounded

Maritime safety information

Source page ref: 372
Navigational and meteorological warnings, forecasts, and other urgent safety messages broadcast to ships, for example through NAVTEX and SafetyNET within the GMDSS. IMO-grounded

Mark Ill system

Source page ref: 372
A membrane-type LNG cargo containment system (Mark III), in which the cargo is held by a corrugated stainless-steel membrane over insulation supported by the hull.

Market Analysis

Source: Chartering & Shipping Terms Glossary
Systematic investigation of the growth and the composition of a market.

Market Maker

Source: Chartering & Shipping Terms Glossary
In a stock exchange, market makers take ownership of shares, allowing people to buy and sell those goods from them. They also can make or lose money from price movements. Outside the financial community, market makers help match buyers and sellers, regardless of whether or not they take possession or own goods. (See Net market maker.)

Marketing

Source: Chartering & Shipping Terms Glossary
The process of organizing and directing all the company activities which relate to determining the market demand and converting the customers buying power into an effective demand for a service and bringing that service to the customer.

MARKS

Source: Chartering & Shipping Terms Glossary
See Shipping Marks.

MARPOL 73/78

Source page ref: 372
The International Convention for the Prevention of Pollution from Ships, the principal IMO treaty for preventing pollution of the sea and air by ships, comprising annexes covering different pollutant types. IMO-grounded

MARPOL 73/78 Annex II

Source page ref: 373
The MARPOL annex governing the control of pollution by noxious liquid substances carried in bulk, such as chemicals, including discharge criteria and tank-cleaning requirements. IMO-grounded

MARPOL 73/78 Annex Ill

Source page ref: 373
The MARPOL annex governing the prevention of pollution by harmful substances carried by sea in packaged form, linked to the IMDG Code. IMO-grounded

MARPOL 73/78 Annex IV

Source page ref: 373
The MARPOL annex governing the prevention of pollution by sewage from ships, including treatment and discharge requirements. IMO-grounded

MARPOL 73/78 Annex V

Source page ref: 373
The MARPOL annex governing the prevention of pollution by garbage from ships, prohibiting or restricting the discharge of most wastes into the sea. IMO-grounded

MARPOL 73/78 Annex VI

Source page ref: 373
The MARPOL annex governing the prevention of air pollution from ships, limiting emissions of sulphur and nitrogen oxides and addressing ship energy efficiency and greenhouse gases. IMO-grounded

MARSEC

Source page ref: 373
Maritime security; the term is associated with maritime security levels used under the ISPS Code framework. IMO-grounded

MARVS

Source page ref: 373
The maximum allowable relief valve setting of a gas-carrier cargo tank, a key design pressure parameter under the IGC Code. IMO-grounded

MASS Code

Source: MSC 108/110 · non-mandatory, target 2030
The IMO code under development for Maritime Autonomous Surface Ships, setting goal-based and functional requirements for ships able to operate with varying degrees of automation and reduced or no crew on board. A non-mandatory MASS Code is targeted for adoption around 2030, with entry into force expected on 1 January 2032, to be followed in due course by a mandatory instrument. IMO-grounded

Mass disease

Source page ref: 373
An outbreak of illness affecting many persons aboard, requiring a public-health response.

Mast

Source page ref: 373
A vertical structure carrying lights, antennas, signalling gear, and sometimes cargo-handling equipment.

Master controller

Source page ref: 373
The control device by which an operator sets the demand to a system, such as a propulsion or winch control.

MASTER PRODUCTION SCHEDULE (MPS)

Source: Chartering & Shipping Terms Glossary
A realistic, detailed, manufacturing plan for which all possible demands upon the manufacturing facilities (such as available personnel, working hours, (management) policy and goals) have been considered and are visualized. The MPS is a statement of what the company expects to produce and purchase expressed in selected items, specific quantities and dates.

Materials Handling

Source: Chartering & Shipping Terms Glossary
The activities of loading, unloading, placing and manipulating material and of in-process movement.

Materials Management

Source: Chartering & Shipping Terms Glossary
The planning and control of the activities related to the materials flow from the suppliers up to the end of the conversion/production process.

MATE’S RECEIPT

Source: Chartering & Shipping Terms Glossary
A document signed by the chief officer of a vessel acknowledging the receipt of a certain consignment on board of that vessel. On this document, remarks can be made as to the order and condition of the consignment.

Maximum ahead service speed

Source page ref: 373
The greatest speed the ship is designed to maintain ahead in service at its deepest draught, a reference for navigation and manoeuvring equipment. IMO-grounded

Maximum allowable working pressure of a piping system

Source page ref: 373
The highest pressure at which a piping system may safely be operated, used as a design and safety limit.

Maximum astern speed

Source page ref: 374
The greatest speed the ship can attain going astern, relevant to manoeuvring and stopping.

Maximum continuous rating (MCR) of engine

Source page ref: 374
The maximum power and speed at which an engine is designed to run continuously, the basis for its rating.

Mayday

Source page ref: 374
The internationally recognised spoken distress signal, indicating grave and imminent danger and a request for immediate assistance. IMO-grounded

MB

Source: Chartering & Shipping Terms Glossary
Merchant Broker

MCF

Source page ref: 374
A unit denoting a thousand cubic feet, used for volumes of natural gas.

MCO

Source: Chartering & Shipping Terms Glossary
See Miscellaneous Charge Order.

MDO (DO)

Source: Chartering & Shipping Terms Glossary
Marine Diesel Oil

Mean time between failures

Source page ref: 374
A statistical measure of the average operating time between failures of equipment, used to express reliability.

Means of access

Source: SOLAS II-1/3-6 · MSC.151(78)
The permanent and portable arrangements — such as ladders, walkways, and staging — provided so a ship's structure, particularly the cargo and ballast tanks of oil tankers and bulk carriers, can be reached safely for close-up survey and inspection, required under SOLAS regulation II-1/3-6. IMO-grounded

Means of rescue (MOR)

Source page ref: 374
The arrangements provided to recover persons from the water and from survival craft, required under SOLAS, distinct from the means of evacuation. IMO-grounded

Means Of Transport

Source: Chartering & Shipping Terms Glossary
Type of vehicle used for the transport of goods (e.g. aircraft, barge, truck, vessel or train).

Measurement Ton

Source: Chartering & Shipping Terms Glossary
A ton of one cubic meter water.

Mechanical efficiency

Source page ref: 374
The ratio of an engine's output power to the power developed in its cylinders, accounting for friction and other mechanical losses.

Mechanical seal

Source page ref: 374
A shaft seal using precisely finished mating faces, one rotating and one fixed, to prevent leakage along a rotating shaft, used in pumps.

Mechanics Lien

Source: Chartering & Shipping Terms Glossary
The legal enforceable claim which a person who has performed work or provided materials is permitted to make against title to the property or as a preferential person in the event the estate or business is liquidated.

MEDICAL FIRST AID GUIDE (MFAG)

Source: Chartering & Shipping Terms Glossary
Instructions to be consulted in case of accidents involving dangerous goods.

Medium-expansion foam

Source page ref: 252
Fire-fighting foam of intermediate expansion ratio between low- and high-expansion foam.

Medium-speed diesel engine

Source page ref: 172
A diesel engine running at moderate speed, more compact than a low-speed engine and usually driving the propeller through gearing or generators.

Medium-speed engine

Source page ref: 374
An engine, typically four-stroke, running at moderate rotational speed, widely used for propulsion through gearing and for power generation.

Melting

Source page ref: 374
The change of a solid to liquid on heating to its melting point.

Membrane BioReactor (MBR)

Source page ref: 374
A sewage-treatment technology combining biological treatment with membrane filtration to produce a high-quality effluent, used in advanced shipboard sewage plants under MARPOL Annex IV. IMO-grounded

Membrane tank

Source page ref: 90
A gas-carrier cargo tank in which a thin metal membrane forms the liquid barrier, the loads being transmitted through insulation to the hull, as in the Mark III and No96 systems under the IGC Code. IMO-grounded

Membrane technology

Source page ref: 375
The use of selectively permeable membranes for separation, such as in reverse-osmosis fresh-water generators and advanced sewage treatment.

Membrane-type LNG cargo containment system

Source page ref: 375
An LNG containment system using a thin membrane backed by insulation supported by the inner hull, allowing the cargo loads to be carried by the ship's structure; built to the IGC Code. IMO-grounded

Memo Bill

Source: Chartering & Shipping Terms Glossary
See Service Bill of Lading.

Memorandum of Understanding on Port State Control (MOU)

Source page ref: 376
A regional agreement among maritime authorities to coordinate the inspection of foreign ships in their ports, to verify compliance with international standards and detain substandard ships. IMO-grounded

Merchant

Source: Chartering & Shipping Terms Glossary
For cargo carried under the terms and conditions of the Carrier’s Bill of Lading and of a tariff, it means any trader or persons (e.g. Shipper, Consignee) and including anyone acting on their behalf, owning or entitled to possession of the goods.

Merchant Haulage

Source: Chartering & Shipping Terms Glossary
Inland transport of cargo in shipping containers arranged by the Merchant. It includes empty container-moves to and from hand-over points in respect of containers released by the Carrier to Merchants. Note: Carrier’s responsibility under the Bill of Lading does not include the inland transport stretch under Merchant Haulage.

Merchant Inspired Carrier Haulage

Source: Chartering & Shipping Terms Glossary
Carrier haulage by a carrier, which is nominated by the shipper or receiver of the goods, but paid by the carrier.

Mermaid propulsion unit

Source page ref: 376
A proprietary podded electric propulsion unit providing combined propulsion and steering.

Messenger line

Source page ref: 377
A light line used to haul across a heavier rope or hawser during mooring or transfer operations.

Messroom

Source page ref: 377
The space where the crew take their meals.

Metacentre M (initial transverse metacentre)

Source page ref: 377
The point about which a ship is considered to oscillate for small angles of heel, the intersection of successive lines of buoyant force; its height above the centre of gravity determines initial stability. IMO-grounded

Metacentric height

Source page ref: 378
The vertical distance between the centre of gravity and the metacentre (GM), the principal measure of a ship's initial stability; minimum values are set by intact-stability criteria. IMO-grounded

Methane hydrate

Source page ref: 378
An ice-like solid in which methane is trapped within a water lattice, found in seabed deposits and of interest as a potential energy source.

Mevis duct

Source page ref: 379
A flow-improving duct fitted ahead of the propeller to condition the inflow and improve propulsive efficiency.

Mezzanine decks

Source page ref: 379
Intermediate, often movable, decks fitted between main decks to increase the area for vehicles or cargo.

MFAG

Source: Chartering & Shipping Terms Glossary
See Medical First Aid Guide

Midship

Source: Chartering & Shipping Terms Glossary
Approximately in the location equally distant from the bow and stern.

Midship section modulus

Source page ref: 379
A geometric property of the hull's midship cross-section relating bending moment to stress, central to assessing the longitudinal strength of the hull girder.

Mill scale

Source page ref: 379
The layer of iron oxide formed on steel during hot rolling, which must be removed before coating because it is loose and promotes corrosion.

Miller timing

Source page ref: 379
A valve-timing technique in which the inlet valve is closed early or late to modify the effective compression, used to improve efficiency and reduce nitrogen-oxide formation.

Mimic diagram

Source page ref: 379
A schematic display of a system showing its components and their status, helping operators monitor and control it.

MIN/MAX

Source: Chartering & Shipping Terms Glossary
Minimum/Maximum (cargo quantity)

Minimum breaking load of a mooring line (MBL)

Source page ref: 379
The rated breaking strength of a mooring line, the basis for selecting lines and for the design of mooring fittings and winches.

Minimum Charge

Source: Chartering & Shipping Terms Glossary
The lowest amount which applies to the transport of a consignment, irrespec- tive of weight or volume (aircargo, shipping).

Minimum comfortable condition of habitability

Source page ref: 379
The least standard of accommodation conditions, such as temperature, ventilation, and noise, considered acceptable for the crew's comfort, addressed under the Maritime Labour Convention. IMO-grounded

Minimum safe manning

Source: SOLAS V/14 · MSC.325(90)
The minimum number and grades of qualified crew a ship must carry to be operated safely, as determined by the flag State and set out in the ship's Minimum Safe Manning Document under SOLAS regulation V/14. IMO-grounded

Minor failure of tanker

Source page ref: 379
A less serious failure category used in assessing tanker safety and risk, involving limited loss of containment or function.

Minor Unit

Source: Chartering & Shipping Terms Glossary
Unit of recorded value (i.e. as recorded by banks) which is a division of the respective unit of currency. Examples are the cent being a one hundredth part of the US Dollar. Note: Some countries have minor units that are used in low- value coinage within a country or locality, but which are not used by the international banking system in making formal records of value. Examples: Belgium, Greece and Spain.

Misalignment

Source page ref: 379
A condition in which components that should be in line, such as shafting and bearings, are out of alignment, causing extra stress, wear, and vibration.

Miscellaneous

Source page ref: 2
A general category for items not falling under other specific headings.

MISCELLANEOUS CHARGE ORDER (MCO)

Source: Chartering & Shipping Terms Glossary
A document issued by a carrier or his agent requesting the issue of an approp- riate passenger ticket and baggage cheque or revision of services to the person named in such document.

Mitsubishi Stator Fin

Source page ref: 379
A proprietary fin arrangement fitted ahead of the propeller to recover swirl energy and improve propulsive efficiency.

Mixed Consignment

Source: Chartering & Shipping Terms Glossary
A consignment of different commodities, articles or goods, packed or tied together or contained in separate packages (aircargo).

Mixed stowage

Source page ref: 379
The stowage together of different cargoes, which must observe segregation rules where dangerous goods are involved. IMO-grounded

MLC (Maritime Labour Convention)

Added — maritime supplement
The International Labour Organization convention, sometimes called the seafarers' bill of rights, that consolidates minimum standards for seafarers' employment conditions, accommodation, food, medical care, wages, and welfare. Compliant ships carry a Maritime Labour Certificate and a Declaration of Maritime Labour Compliance. IMO-grounded

MMBTU

Source page ref: 379
One million British thermal units, a unit of energy used in the gas trade, for example for pricing LNG.

MMSCFD

Source page ref: 379
Million standard cubic feet per day, a unit of gas flow rate used in the gas industry.

MOA

Source: Chartering & Shipping Terms Glossary
Memorandum of Agreement

MOB RETRIEVAL EQUIPMENT

Source page ref: 380
Equipment provided to recover a person who has fallen overboard from the water back to the ship, part of the means of rescue. IMO-grounded

Mobdock

Source page ref: 380
A proprietary mobile or floating docking system.

Mobile Offshore Units

Source page ref: 384
Movable offshore structures such as drilling rigs and accommodation units that can be relocated; mobile offshore drilling units are addressed by the IMO MODU Code. IMO-grounded

Mode Of Transport

Source: Chartering & Shipping Terms Glossary
Method of transport used for the conveyance of goods, (e.g. by rail, by road, by sea).

MODEL

Source: Chartering & Shipping Terms Glossary
A representation of a process or system that attempts to relate the most important variables in the system in such a way that analysis of the model leads to insights into the system.

Model testing tanks

Source page ref: 385
Test facilities (towing tanks and basins) in which scale ship models are tested to measure resistance, propulsion, seakeeping, and manoeuvring.

Modified atmosphere

Source page ref: 392
A cargo space atmosphere with altered gas composition, for example reduced oxygen, used to preserve perishable cargo.

MODU Code

Source: MODU Code
The Code for the Construction and Equipment of Mobile Offshore Drilling Units, which sets safety standards for the design, construction, and equipment of drilling rigs and similar mobile offshore units so as to provide a level of safety equivalent to that of conventional ships. IMO-grounded

Molchopt

Source: Chartering & Shipping Terms Glossary
More or Less Charterers Option

MOLOO

Source: Chartering & Shipping Terms Glossary
More or Less Owners Option

Moment

Source page ref: 392
The turning effect of a force about a point, equal to the force times its distance, fundamental to stability and structural analysis.

Moment of inertia, mass moment of inertia

Source page ref: 392
A measure of a body's resistance to angular acceleration about an axis; the area moment of inertia of a section measures its resistance to bending.

Moment of statical stability

Source page ref: 393
The righting moment that tends to return a heeled ship to upright, equal to the displacement times the righting arm. IMO-grounded

Monitoring

Source page ref: 393
The continuous observation and measurement of conditions or parameters to detect changes and ensure safe operation.

Monitoring system

Source page ref: 393
A system that measures and displays the state of machinery and ship functions and raises alarms on abnormal conditions.

Monitoring workstation

Source page ref: 393
A bridge or control-room position from which the ship's systems are monitored.

Monorail provision crane

Source page ref: 146
A small crane running on an overhead rail used to handle stores and provisions.

Montreal Protocol

Source page ref: 393
The international agreement to phase out substances that deplete the ozone layer, such as halons and CFCs, which has driven the replacement of these fire-extinguishing agents and refrigerants aboard ship. IMO-grounded

Moonpool

Source page ref: 393
An opening through the hull of an offshore or specialised vessel through which equipment, divers, or tools are deployed into the sea while sheltered from waves.

Mooring

Source page ref: 393
The securing of a ship to a berth, buoy, or another vessel using lines and ground tackle.

Mooring and Towing Manual

Source page ref: 393
A manual recommended by the IMO giving information on the ship's mooring and towing arrangements and their safe use. IMO-grounded

Mooring arrangement, mooring pattern, mooring layout

Source page ref: 393
The plan of lines and fittings used to hold a ship at a berth, arranged to restrain it against wind, current, and tide.

Mooring drums

Source page ref: 393
The drums of a mooring winch on which the mooring lines are wound.

Mooring equipment

Source page ref: 394
The winches, drums, capstans, bitts, fairleads, and lines used to moor a ship; shipboard fittings and supporting structure are subject to strength requirements. IMO-grounded

Mooring fittings, shipboard fittings

Source page ref: 394
The deck fittings such as bollards, bitts, fairleads, and chocks used in mooring and towing, whose strength and arrangement are governed by class and IMO requirements. IMO-grounded

Mooring lines

Source page ref: 394
The ropes or wires used to secure a ship to a berth or buoy.

Mooring restrain

Source page ref: 394
The restraining force that the mooring arrangement provides to hold the ship against environmental forces.

Mooring retention

Source page ref: 394
The ability of the mooring system to keep the ship safely secured under the expected loads.

Mooring system

Source page ref: 250
The complete arrangement of lines, fittings, and equipment by which a ship or floating unit is held in position, which for offshore units may include anchors and chains.

Mooring trials

Source page ref: 394
Tests of the mooring winches and arrangements to confirm they perform as required.

Mooring winch

Source page ref: 394
A powered winch used to heave in and hold mooring lines, often with an automatic tensioning capability.

Mooring winch brake

Source page ref: 395
The brake on a mooring winch drum that holds the line under load and renders (slips) at a set tension to protect the line and fittings.

Mooring winch brake design capacity, brake holding capacity

Source page ref: 394
The load the mooring-winch brake is designed to hold, set in relation to the line's breaking load to ensure the line renders before it parts.

Mooring winches

Source page ref: 395
The powered winches used for handling and holding mooring lines aboard ship.

Mooring winches drives

Source page ref: 395
The power systems (electric, hydraulic, or steam) that drive mooring winches.

Moss Rossenberg system

Source page ref: 397
A self-supporting spherical-tank LNG containment system (Moss type) in which independent spherical tanks carry the cargo, built to the IGC Code. IMO-grounded

Motor enclosures

Source page ref: 397
The protective housings of electric motors, classified by their degree of protection against ingress and, for hazardous areas, by their type of explosion protection.

Motor starter

Source page ref: 397
The device used to start and stop an electric motor and protect it from overload.

Moulded depth

Source page ref: 397
The vertical distance from the top of the keel to the underside of the freeboard deck at side, measured to the moulded lines, a principal dimension.

Moulded draught

Source page ref: 194
The draught measured to the moulded baseline (top of keel) rather than to the bottom of the keel.

Moulded lines

Source page ref: 397
The lines defining the hull form to the inside of the shell plating, the reference surface for the ship's dimensions and structure.

Movement

Source: Chartering & Shipping Terms Glossary
The act or process of changing the position of an object and or people.

MPC

Source: Chartering & Shipping Terms Glossary
See Multi Purpose Carrier.

MPS

Source: Chartering & Shipping Terms Glossary
See Master Production Schedule.

MRP-I

Source: Chartering & Shipping Terms Glossary
See Material Requirements Planning.

MRP-II

Source: Chartering & Shipping Terms Glossary
See Manufacturing Resource Planning.

MRV (Monitoring, Reporting, Verification)

Added — maritime supplement
The general regulatory approach requiring ships to monitor and report emissions or fuel-consumption data according to an approved plan, with independent verification of the resulting reports. It provides the audited data foundation for carbon-pricing and efficiency schemes such as the EU-MRV and IMO DCS. IMO-grounded

MT

Source: Chartering & Shipping Terms Glossary
Mertic Tonne (i.e. 1,000 kilos)

MTO/CARRIER

Source: Chartering & Shipping Terms Glossary
See Multimodal Transport Operator/Carrier.

Mud-box, strum box

Source page ref: 397
A perforated box fitted on the end of a bilge suction pipe that strains out debris to prevent it blocking the pump.

Multi Buoy Mooring (MBM)

Source: ISGOTT 6th Edition (MaritimeDatabase #103)
A tanker mooring arrangement in which the vessel is held in position by several buoys together with its own anchors while connected to a submarine pipeline, used at some offshore terminals.

Multi Purpose Carrier

Source: Chartering & Shipping Terms Glossary
See Multi Purpose Vessel.

Multi Purpose Vessel

Source: Chartering & Shipping Terms Glossary
Vessel designed for the carriage of different types of cargo: general, bulk, heavy and/or containerized cargo. Synonym: Multi Purpose Carrier (MPC).

Multi-Buoy Moorings (MBM), conventional buoy moorings

Source page ref: 393
An offshore mooring arrangement in which a tanker is held by several buoys and its own anchors while connected to a pipeline for loading or discharging.

Multi-purpose cargo ship

Source page ref: 87
A ship designed to carry several different cargo types, such as general cargo, containers, and bulk, with flexible holds and cargo gear.

Multi-purpose dry cargo vessel

Source page ref: 399
A versatile dry-cargo ship able to carry a range of cargoes including break-bulk, containers, and project cargo.

Multifunctional Subsea Operation Vessels

Source page ref: 397
Offshore vessels equipped to carry out a variety of subsea tasks, such as construction, inspection, and intervention, often with cranes and remotely operated vehicles.

Multimodal Transport

Source: Chartering & Shipping Terms Glossary
The carriage of goods (containers) by at least two different modes of transport.

Multimodal Transport Document

Source: Chartering & Shipping Terms Glossary
See Combined Transport Document.

MULTIMODAL TRANSPORT OPERATOR/CARRIER

Source: Chartering & Shipping Terms Glossary
The person on whose behalf the transport document or any document

Multiple Sourcing

Source: Chartering & Shipping Terms Glossary
Selecting of and working with more than two equivalent suppliers for a certain product.

Multiple-container lifting

Source page ref: 397
The handling of more than one container in a single lift, using a spreader designed to grip several boxes at once.

Mushroom

Source page ref: 401
A mushroom-shaped fitting, such as a mushroom ventilator head or a mushroom anchor used for permanent moorings.

Musketeer door

Source page ref: 401
A type of watertight or weathertight door arrangement.

Muster station

Added — maritime supplement
A designated assembly point to which passengers and crew report on hearing the emergency signal, and from which they proceed to their survival craft. Muster lists, stations, and drills are required under SOLAS to ensure an orderly response in an emergency. IMO-grounded